Positional sensing notes

Discussions of any related software

Moderator: Related software moderators

Re: Positional sensing notes

Postby dmitri » Wed Oct 17, 2012 10:56 pm

everson wrote:Then it has to produce positive first half wave

With a precision rectifier the polarity of the first half wave doesn't matter.
dmitri
Site Admin
 
Posts: 8709
Joined: Fri Aug 03, 2007 8:05 pm

Re: Positional sensing notes

Postby angr77 » Sat Nov 17, 2012 8:52 am

Hi!

I have done some studies on positional sensing...for my own project using MD + the nice rectifier board. The MD supports upto 5 drums with the PS function. It is sending control change over cc16. This channel seems to be default for snares. Studying VST plug-ins like Addictive Drums it is supporting cc messages on hihat(cc4), snare(cc16, possible to change) and Ride(cc17, possible to change)

Two questions
1 does it matter which cc channel is used e.g cc16...when dealing with several drums or do each drum need to have its own cc number? Studying the TD-30 manual...they seems to pack all tooms/aux trigger channels into cc18-cc19)
2. Addictive Drums do support 3 types of drums to receive cc messages and have sounds that maps to support this...do any other drum plug-ins support more? Superior, Steven Slate?


Best regards

Anders
Sonor, Drum-Tec heads, Roland CY14, CY12&15R, 2x BT-1 & VH11, 12, 13, Triggera D11, 2xD14, Pintech Dingbat, Letric Moo, Quartz triggers, 2xARM based MegaDRUM, PS Board, M-Audio FT Ultra 8R, Addictive Drums 2.1.6, Surface Pro 5 http://zourman.com
angr77
 
Posts: 622
Joined: Tue Nov 29, 2011 10:42 pm
Location: Stockholm, Sweden

Re: Positional sensing notes

Postby dmitri » Sat Nov 17, 2012 11:40 am

1. I don't think there is any standard for this. CC16 message is sent right before NoteOn so even for multiple PS pads using just a single CC16 theoretically is enough for sampling software to correctly decide to modify only the a note coming right after CC16. The other way is to use different MIDI channel for each PS pad.
dmitri
Site Admin
 
Posts: 8709
Joined: Fri Aug 03, 2007 8:05 pm

Re: Positional sensing notes

Postby angr77 » Sun Nov 18, 2012 10:33 pm

Great Stuff Dmitri...now do even I understand how the cc16 works!

Am I right...if counting to 8 inputs with the ability to handle Posistional Sensing in the last firmware?? :-)
Sonor, Drum-Tec heads, Roland CY14, CY12&15R, 2x BT-1 & VH11, 12, 13, Triggera D11, 2xD14, Pintech Dingbat, Letric Moo, Quartz triggers, 2xARM based MegaDRUM, PS Board, M-Audio FT Ultra 8R, Addictive Drums 2.1.6, Surface Pro 5 http://zourman.com
angr77
 
Posts: 622
Joined: Tue Nov 29, 2011 10:42 pm
Location: Stockholm, Sweden

Re: Positional sensing notes

Postby Maylord.war » Sun Nov 18, 2012 11:46 pm

The 8 channel of positional sensing are avaible only if you have an atmega 1284 , with the 644 you can use pos sensing only in one channel ( snare OR tom OR ride etc..)
Maylord.war
 
Posts: 210
Joined: Fri Feb 19, 2010 2:42 am

Re: Positional sensing notes

Postby dmitri » Mon Nov 19, 2012 10:19 am

On Atmega644 it's 4 inputs with positional sensing.
dmitri
Site Admin
 
Posts: 8709
Joined: Fri Aug 03, 2007 8:05 pm

Re: Positional sensing notes

Postby angr77 » Tue Nov 27, 2012 4:22 pm

Hi!

When using the positional sensing function, Atmega 644 supports 4 inputs, Atmega 1284 supports 8 inputs, but how many inputs do the nice rectifier board support? 5 inputs? True?

No big deal...just for the knowledge...5 is overkill any way and will be more than enough for everybody!!

Best regards

Anders
Sonor, Drum-Tec heads, Roland CY14, CY12&15R, 2x BT-1 & VH11, 12, 13, Triggera D11, 2xD14, Pintech Dingbat, Letric Moo, Quartz triggers, 2xARM based MegaDRUM, PS Board, M-Audio FT Ultra 8R, Addictive Drums 2.1.6, Surface Pro 5 http://zourman.com
angr77
 
Posts: 622
Joined: Tue Nov 29, 2011 10:42 pm
Location: Stockholm, Sweden

Previous

Return to Related Software

Who is online

Users browsing this forum: No registered users and 190 guests