Hihat beat missing after a chick

[karlarsch]

Hi Dmitri, i´m quite fine now with my drumset exept one thing:
After a foot-chick on the hihat the following hihat-beat (bow) is ignored for about 150 milliseconds.
When i use ´New Algorithm`this doesn´t happen, but i prefer the old one. Am i the only one who has this proplem?
Best regards
Karl
(Using the latest software, the device is built by You (32 inp.))

[dmitri]

It depends on the velocity of the chick and DynLevel and DynTime settings (double triggering suppression) of the HiHat cymbal input. Did you try to reduce DynLevel and/or DynTyme?

[karlarsch]

Yes, doesn´t help. Any idea?

[dmitri]

Even if you reduce the both to zero? What is Resttriger set to on the HiHat input?

[dmitri]

Also how do you measure that hits are ignored for about 150ms after chicks?

[karlarsch]

Well, everything is fine now, the megadrum needed a restart. The Dyn-Vel and Dyn-time did the trick. Thanks for Your quick help.
Karl

[Kabonfaiba]

Glad I found this thread, since I started noticing this happen on 16ths, on the bow.

Upgraded to latest firmware 20160406.

The missing notes only happen on the Head/Bow, not the edge.

This is with my Roland VH-11.

The problem exists on both old and new algorithms. It's not affected by changing Dyn-Vel or Dyn-time settings on the Head/Bow, only disabling the chick note will solve the issue.

Triggering on the Hi-hat Head/Bow after pressing the pedal down is momentarily blocked (yes, by about 150ms) So on 16ths that's 2 missed notes, on 4ths it will miss 1 note immediately after the chick.

Attached my config just in case it helps.

[Kabonfaiba]

Okay, the problem has cured itself overnight. I've done nothing but switched it on to play.

I'm going to start calling these instances; mega-quirks.