configuring MD into AD

Discussions of any related software

Moderator: Related software moderators

configuring MD into AD

Postby rahmanabas » Sat Jun 15, 2013 2:48 pm

Hi,

I have trouble trying to set up my MD into addictive drums hosted by cubase. I am using synthex 2.5 board. As of now, I am using the old unencrypted firmware version 20100516 just to see if my MD is working properly(thinking of buying the protected bootloader avr). I also have only 1 4851 at the moment(soldering the rest) so I just want to test the kick in AD. The midi note of the kick is 36 in MD as well as AD. I have set "MEGADRUM USB MIDI" as the midi device in cubase. I cannot seem to get any sound. There is MIDI activity from MDM midi log when I tap the piezo. I appreciate any help to solve this problem.
rahmanabas
 
Posts: 7
Joined: Sat Sep 08, 2012 4:04 pm

Re: configuring MD into AD

Postby angr77 » Sat Jun 15, 2013 3:49 pm

Have you created an instrument track in Cubase where the input is the megadrum midi port and the instrument is Addictive Drums? If you run the sequencer in Addictive Drums...do you hear any sound?

Do you see the midi activity in Cubase?

Best reglars

Angr77
Last edited by angr77 on Sat Jun 15, 2013 3:55 pm, edited 1 time in total.
Sonor, Drum-Tec heads, Roland CY14, CY12&15R, 2x BT-1 & VH11, 12, 13, Triggera D11, 2xD14, Pintech Dingbat, Letric Moo, Quartz triggers, 2xARM based MegaDRUM, PS Board, M-Audio FT Ultra 8R, Addictive Drums 2.1.6, Surface Pro 5 http://zourman.com
angr77
 
Posts: 622
Joined: Tue Nov 29, 2011 10:42 pm
Location: Stockholm, Sweden

Re: configuring MD into AD

Postby Sabre » Sat Jun 15, 2013 3:55 pm

With the AD kit interface open in Cubase, if you click on the bass drum do you hear a sound then?
Sabre
 
Posts: 29
Joined: Sat Oct 24, 2009 6:56 pm

Re: configuring MD into AD

Postby rahmanabas » Sun Jun 16, 2013 4:46 am

angr77 wrote:Have you created an instrument track in Cubase where the input is the megadrum midi port and the instrument is Addictive Drums? If you run the sequencer in Addictive Drums...do you hear any sound?

Do you see the midi activity in Cubase?

Best reglars

Angr77


I see midi activity in cubase when i select MEGADRUM MIDI USB as input. However, when I run AD, I can't hear any sound.

Sabre wrote:With the AD kit interface open in Cubase, if you click on the bass drum do you hear a sound then?


no sound
rahmanabas
 
Posts: 7
Joined: Sat Sep 08, 2012 4:04 pm

Re: configuring MD into AD

Postby rahmanabas » Sun Jun 16, 2013 12:54 pm

Oh...Turns out I made a blunder by not selecting ASIO as line out in cubase.. Now megadrum works..or at least the kick works...I have not soldered the rest of the 4851 smd chips... However, I do have interference from the snare as I hit the kick.. Should I re-map the note for the kick?Or tweak the threshold?
rahmanabas
 
Posts: 7
Joined: Sat Sep 08, 2012 4:04 pm

Re: configuring MD into AD

Postby angr77 » Sun Jun 16, 2013 7:32 pm

Great stuff!

If the snare follows the kick...take a look in MDM and the midi monitor. If you see any thing more than note 36 when you hit the kick...then you start to error seek the MD. If not...check your settings in Addictive Drums.

Best Regards

Angr77
Sonor, Drum-Tec heads, Roland CY14, CY12&15R, 2x BT-1 & VH11, 12, 13, Triggera D11, 2xD14, Pintech Dingbat, Letric Moo, Quartz triggers, 2xARM based MegaDRUM, PS Board, M-Audio FT Ultra 8R, Addictive Drums 2.1.6, Surface Pro 5 http://zourman.com
angr77
 
Posts: 622
Joined: Tue Nov 29, 2011 10:42 pm
Location: Stockholm, Sweden


Return to Related Software

Who is online

Users browsing this forum: No registered users and 198 guests