Positional sensing notes

Discussions of any related software

Moderator: Related software moderators

Re: Positional sensing notes

Postby Maylord.war » Tue Aug 14, 2012 10:42 pm

Hi all

I've tryed some configuration with my snare pad with positive and negative wire configurations but the positional sensing is inconsistant.

I'm waiting to come the components to build the rectifier , based on LMC6032

I will report my test and impression as soon as possible. ;)
Maylord.war
 
Posts: 210
Joined: Fri Feb 19, 2010 2:42 am

Re: Positional sensing notes

Postby everson » Tue Aug 14, 2012 10:55 pm

Yes, please do.

Sadly, I don`t think I could be able to make it. Seems pretty complicated for an electronic newbie like me.
Besides, the only alternative to LMC6032 I could find here is LM6134, and it costs 10e ...
My Videos
My kit: 6 DIY pads, CY5, PCY135, Hall sensor hihat, krigg - kick pedal trigger, megadrum
everson
 
Posts: 165
Joined: Mon Jan 02, 2012 10:14 pm

Re: Positional sensing notes

Postby Maylord.war » Tue Aug 14, 2012 11:02 pm

Hi Everson, happy to ear you :)

LMC6134 ? The op.amp in the original schematics is the LMC6034.

6034 and 6032 are identical, the only difference are the channels (6032 two channels, 6034 have four channel )

Lmc6032 cost me around 1€ :D
Maylord.war
 
Posts: 210
Joined: Fri Feb 19, 2010 2:42 am

Re: Positional sensing notes

Postby everson » Tue Aug 14, 2012 11:14 pm

Actually, without C - LM6134. Dmitri mentioned it as an alternative. I wasn`t able to find either LMC6032 nor LMC6034.
I can get a LM6134, but for 10e.
x 2 + other parts + shipping + my destructions :D + ...
My Videos
My kit: 6 DIY pads, CY5, PCY135, Hall sensor hihat, krigg - kick pedal trigger, megadrum
everson
 
Posts: 165
Joined: Mon Jan 02, 2012 10:14 pm

Re: Positional sensing notes

Postby chrishopf » Fri Aug 17, 2012 11:41 am

For my opinion a TS972IN, TS922IN or a TS912IN should work.
chrishopf
 
Posts: 33
Joined: Wed Nov 02, 2011 4:15 pm

Re: Positional sensing notes

Postby everson » Tue Sep 11, 2012 7:14 pm

Maylord.war wrote:Hi all

I've tryed some configuration with my snare pad with positive and negative wire configurations but the positional sensing is inconsistant.

I'm waiting to come the components to build the rectifier , based on LMC6032

I will report my test and impression as soon as possible. ;)


Any updates?
My Videos
My kit: 6 DIY pads, CY5, PCY135, Hall sensor hihat, krigg - kick pedal trigger, megadrum
everson
 
Posts: 165
Joined: Mon Jan 02, 2012 10:14 pm

Re: Positional sensing notes

Postby angr77 » Tue Oct 16, 2012 7:20 pm

Hi!

I was thinking about the positional sensing in MegaDrum - It seems like most VST drum plugins do use position controller over CC# + number (e.g. AD is using 16 for snares) + Position Range. Would that possible to archive this functon in future versions of the MegaDrum firmware??

Best Regards

Anders
Sonor, Drum-Tec heads, Roland CY14, CY12&15R, 2x BT-1 & VH11, 12, 13, Triggera D11, 2xD14, Pintech Dingbat, Letric Moo, Quartz triggers, 2xARM based MegaDRUM, PS Board, M-Audio FT Ultra 8R, Addictive Drums 2.1.6, Surface Pro 5 http://zourman.com
angr77
 
Posts: 622
Joined: Tue Nov 29, 2011 10:42 pm
Location: Stockholm, Sweden

Re: Positional sensing notes

Postby everson » Tue Oct 16, 2012 7:58 pm

CC16 is default in MD as well ...
But you have to have the precision rectifier device.
My Videos
My kit: 6 DIY pads, CY5, PCY135, Hall sensor hihat, krigg - kick pedal trigger, megadrum
everson
 
Posts: 165
Joined: Mon Jan 02, 2012 10:14 pm

Re: Positional sensing notes

Postby angr77 » Tue Oct 16, 2012 8:10 pm

Hi!

So the function is actually already there?

Best Regards

Anders
Sonor, Drum-Tec heads, Roland CY14, CY12&15R, 2x BT-1 & VH11, 12, 13, Triggera D11, 2xD14, Pintech Dingbat, Letric Moo, Quartz triggers, 2xARM based MegaDRUM, PS Board, M-Audio FT Ultra 8R, Addictive Drums 2.1.6, Surface Pro 5 http://zourman.com
angr77
 
Posts: 622
Joined: Tue Nov 29, 2011 10:42 pm
Location: Stockholm, Sweden

Re: Positional sensing notes

Postby everson » Tue Oct 16, 2012 8:13 pm

Sure it is. But you have to have a mesh headed drum, with cone in the center. Then it has to produce positive first half wave. And most important - you have to make the precision rectifier device.
My Videos
My kit: 6 DIY pads, CY5, PCY135, Hall sensor hihat, krigg - kick pedal trigger, megadrum
everson
 
Posts: 165
Joined: Mon Jan 02, 2012 10:14 pm

PreviousNext

Return to Related Software

Who is online

Users browsing this forum: No registered users and 53 guests