Latency problem

Discussions of any related software

Moderator: Related software moderators

Latency problem

Postby raul » Mon Sep 30, 2013 6:19 pm

Hello everyone
my problem is this: I have a MD32 ch connected to the PC, and use the software Reaper with VST Addictive drum, and I use a sound card M-Audio fasttrack pro connected via USB, but I can not reduce latency in an acceptable manner,
if I connect MD to the Alesis D4 via midi, latency is practically zero,
I believe that USB and midi of MD to have the same data rate (in fact USB much faster ), and the USB cable is 30cm in length.

The question is: what requirements must have the PC for having the minimal response between software and usb connection?

thanks to all
raul
 
Posts: 10
Joined: Mon Aug 31, 2009 1:39 pm

Re: Latency problem

Postby chrishopf » Mon Sep 30, 2013 7:51 pm

Do you use an ASIO driver for the soundcard? It reduces the latency dramatically.
chrishopf
 
Posts: 33
Joined: Wed Nov 02, 2011 4:15 pm

Re: Latency problem

Postby raul » Wed Oct 02, 2013 9:22 am

Hello chrishopf,
thanks for the reply.

I have also used the asio4all drivir, for M-Audio Fasttrak pro, configured to obtain the lowest latency, but the latency is reduced little, is not acceptable, when I play the drum the delay is very annoying.
My PC is thus formed:
processor: Atalon (tm) II x2 250, 3.2Ghz,2GB Ram
Op. system: Win xp 2002 professional SP3
the software is intall 32bit.

I think that everything is critical (computer / software)
I should have a faster computer?
I read in various posts but have not found the answer, what do you think?

many thanks.
raul
 
Posts: 10
Joined: Mon Aug 31, 2009 1:39 pm

Re: Latency problem

Postby airflamesred » Wed Oct 02, 2013 10:15 am

I'm sure it's not an MD problem. I think there are settings in AD and reaper you may need to adjust.

koby drums - Triggera krigg/Bix - megadrum - Kontakt........... Samples from all and sundry.
airflamesred
 
Posts: 1199
Joined: Fri Mar 30, 2012 1:58 pm
Location: Hammersmith

Re: Latency problem

Postby dmitri » Wed Oct 02, 2013 11:59 am

Make a screenshot of the software configuration where it shows that it uses ASIO2 drivers.
dmitri
Site Admin
 
Posts: 8709
Joined: Fri Aug 03, 2007 8:05 pm

Re: Latency problem

Postby angr77 » Wed Oct 02, 2013 5:35 pm

Asio4all is always the second best(Rubbish in my opinion)

Download the latest drivers for your FastTrack Pro device from Avid. (this is dated 20-06-2013)

http://cdn.avid.com/AudioDrivers/Win/Fa ... 6.1.10.zip

Angr77 ... A happy fasttrack ultra 8r user.
Last edited by angr77 on Wed Oct 02, 2013 10:20 pm, edited 1 time in total.
Sonor, Drum-Tec heads, Roland CY14, CY12&15R, 2x BT-1 & VH11, 12, 13, Triggera D11, 2xD14, Pintech Dingbat, Letric Moo, Quartz triggers, 2xARM based MegaDRUM, PS Board, M-Audio FT Ultra 8R, Addictive Drums 2.1.6, Surface Pro 5 http://zourman.com
angr77
 
Posts: 622
Joined: Tue Nov 29, 2011 10:42 pm
Location: Stockholm, Sweden

Re: Latency problem

Postby airflamesred » Wed Oct 02, 2013 9:58 pm

Anders, I see that FastTrack Pro device is £300. What's the advantage? I'm in the process of building a new system and I'm a bit lost on this area.

koby drums - Triggera krigg/Bix - megadrum - Kontakt........... Samples from all and sundry.
airflamesred
 
Posts: 1199
Joined: Fri Mar 30, 2012 1:58 pm
Location: Hammersmith

Re: Latency problem

Postby angr77 » Wed Oct 02, 2013 10:18 pm

Hi best friend!

I don't know if i would have bought a Fast Track Pro today...the card is rather old...and has gone end of life at most stores. I bought my fast track ultra 8r...for about € 220 ..second hand. Rack mounted, 24 bit/96khz, 8x balanced outputs...a nice DSP which is freeing up the computers cpu...but the design is rather old...i think you can find even better cards today.

The fine thing with Avid/M-audio modules is their driver policy. There are drivers available for W8/Mac for most legacy sound cards.

Angr77
Sonor, Drum-Tec heads, Roland CY14, CY12&15R, 2x BT-1 & VH11, 12, 13, Triggera D11, 2xD14, Pintech Dingbat, Letric Moo, Quartz triggers, 2xARM based MegaDRUM, PS Board, M-Audio FT Ultra 8R, Addictive Drums 2.1.6, Surface Pro 5 http://zourman.com
angr77
 
Posts: 622
Joined: Tue Nov 29, 2011 10:42 pm
Location: Stockholm, Sweden

Re: Latency problem

Postby airflamesred » Fri Oct 04, 2013 8:35 pm

Anders, I looked at this and the Behringer FCA1616 but I see people reporting 17ms latency! Do the asio4all drivers work on any sound card/OS?
thanks in advance.
Mark

koby drums - Triggera krigg/Bix - megadrum - Kontakt........... Samples from all and sundry.
airflamesred
 
Posts: 1199
Joined: Fri Mar 30, 2012 1:58 pm
Location: Hammersmith

Re: Latency problem

Postby angr77 » Sat Oct 05, 2013 9:15 am

I have not seen or tested the FCA1616...the specs look good...and the corperation with Midas makes Behringer shine a bit extra. (a friend of mine arranged a concert with a famous Swedish band...we looked at their rider before the gig...the only thing it included was: No Behringer! This was some years ago...)

The 17ms rumors depends totally on how they tested the card...64 bit ASIO drivers,OS(W8 will cut a lot of latency)...FireWire/USB?

ASIO4ALL will work on any PC based soundcard...but trust me...you won't get happy. But for test purposes...no problem.

I have written some articles about latency on my site...zourman.com...there is a subpage for this....

http://powerhell.wordpress.com/about/zo ... windows-8/


Anders.
Sonor, Drum-Tec heads, Roland CY14, CY12&15R, 2x BT-1 & VH11, 12, 13, Triggera D11, 2xD14, Pintech Dingbat, Letric Moo, Quartz triggers, 2xARM based MegaDRUM, PS Board, M-Audio FT Ultra 8R, Addictive Drums 2.1.6, Surface Pro 5 http://zourman.com
angr77
 
Posts: 622
Joined: Tue Nov 29, 2011 10:42 pm
Location: Stockholm, Sweden

Next

Return to Related Software

Who is online

Users browsing this forum: No registered users and 90 guests