Rom Maps & Rom Kits

[krickgpe]

MyTom1 is pluging on ch6 (physical place of tom1) of the MD the midi note selected for it, is 71 and must corresponding at tom1 in AD2 (with MD Adavnced map) but when I hit it, it play tom3 midi note 67!!!! how is possible and how can I change that?...
Thanks

[dmitri]

Take a screenshot of settings in MDM for Tom1.

[krickgpe]

Take a screenshot of settings in MDM for Tom1.

This is it :

[dmitri]

All labels are blue, this means MDM config and MegaDrum config are out of sync. Did you actually send these settings from MDM to MegaDrum?

[angr77]

I would guess that you still are using the input 10 for TOM1. Input 10 triggers midi note 67. (Input 10 for tom1 is the default for MD)

The reason why I have changed this is that I wanted to utilize the opportunity to have positional sensing on the TOMS. (Input 4-6-8-10-12 if using a PS add-on card)

Best Regards

ANGR77

[krickgpe]

I would guess that you still are using the input 10 for TOM1. Input 10 triggers midi note 67. (Input 10 for tom1 is the default for MD)

The reason why I have changed this is that I wanted to utilize the opportunity to have positional sensing on the TOMS. (Input 4-6-8-10-12 if using a PS add-on card)

Best Regards

ANGR77

Physicaly my tom1 is in input 6 of the MD, concretly what're you suggest me to do? Thank you for your help...

[dmitri]

1. Did you read my previous reply?

All labels are blue, this means MDM config and MegaDrum config are out of sync. Did you actually send these settings from MDM to MegaDrum?

2. You say your tom1 is connected to input 6. Isn't it in fact jack 6 as per viewtopic.php?f=3&t=1392?

On the back (from left to right looking from the back) top row:
1. HiHat pedal/controller input
2. Kick
3. HiHat
4. Snare
5. Ride
6. Crash
7. Tom1
8. Tom2
9. Tom3
10. Tom4

One hint: If you change Note number of the input but MIDI Note doesn't change when you hit the pad then you're making changes to a wrong input.
For example, if your tom is connected to jack "6. Crash" (which is a stereo jack for inputs 8 and 9) but you're making changes to input 6 (which is in fact connected to jack 5) then you're making changes to a wrong input.

[airflamesred]

Tick the triggeredin box in the misc settings and hit the pad. MDM will then change screen to show you the pad you are hitting. Don't forget to turn it off.

[krickgpe]

All labels are blue, this means MDM config and MegaDrum config are out of sync. Did you actually send these settings from MDM to MegaDrum?

I try but I always get sysex timeout error...

[krickgpe]

Tick the triggeredin box in the misc settings and hit the pad. MDM will then change screen to show you the pad you are hitting. Don't forget to turn it off.

Thanks for this info...