Pc Set Up for Megadrum

[Thanasis]

I have installed a new sound card ESI Julia Ext. For hihat I have these settings. What do I have to configure for open hihat ? I use Yamaha HH135 with DW 9500 hihat pedal.
https://imgur.com/a/9stkB

[dmitri]

I have installed a new sound card ESI Julia Ext. For hihat I have these settings. What do I have to configure for open hihat ? I use Yamaha HH135 with DW 9500 hihat pedal.
https://imgur.com/a/9stkB

You mean, what you need to configure in MegaDrum? You need to at least configure Low and High levels and then Open level.

[Thanasis]

I mean how to set up the hihat pedal . Cannot understand the meaning of the hihat pedal settings like type,curve, chick curve, hihat input. What numbers I have to input inside these settings? I understand only the notes that have to be set up. I use a standard hihat pedal by DW.
Any help here?

[dmitri]

Have a look at viewtopic.php?p=33557#p33557
If you still don't something, please be more specific with what is not clear.

[Thanasis]

so the lowest level of the pedal position is 20 and the open level depends on how open I want it. I entered the value 400 but again cannot hear any sound from the hihat when using the pedal. Can you please tell me which values to set up?

[dmitri]

so the lowest level of the pedal position is 20 and the open level depends on how open I want it. I entered the value 400

Why 20 and 400? Is it because someone uses this values? Do you have exactly the same pedal to use these values?

but again cannot hear any sound from the hihat when using the pedal.

Which sounds do you expect to hear?

Can you please tell me which values to set up?

If I had exactly the same pedal and was using exactly the same drum synth I could tell you exactly which values to use. Unfortunately this is not the case so I can only help you to find those settings. For this you need to understand what pedal parameters do (which I can help you with) and how to configure your drum synth for the pedal (drum synth documentation?).
Do you understand what Pedal parameters do and what they are for? If not, which parameters you don't understand?

[Thanasis]

I am using a standard hi-hat pedal the DW 9000 with Yamaha RHH-135 .I can get some sounds from the hihat pad but I need to know what values to add to megadrum in order to make it work. For example when the hihat is open and when semi and when closed. Does anyone else has the same hihat with a standard hihat pedal?
http://www.dwdrums.com/hardware/hw.asp?hw=dwcp9500

[Thanasis]

I changed to these settings on MEgadrum and I get sounds.How do I change sensitivity and velocity?

[jarosz]

In the HiHat Pedal section there's a setting "HiHat Input" which in set to 2 in your config. That way hihat notes you've set up are bond to the pad connected to input 2 of MegaDrum with its sensitivity, velocity curve and so on.

[Thanasis]

Ok for the rest cymbals?
Also does anyone who uses Addictive Drums 2 knows how to change midi mapping (if possible?)