The latest MegaDrumManagerFX version is now 20230129.

In this version:
1. Made some internal provisions for future firmware versions.

I'm going away for whole of July. In preparation I pre-built most popular modules and kits which can be shipped 2-3 days after an order.
I pre-built:

56 inputs modules: ( modules info in the forum )
3 modules with a 2.4" color LCD
1 module with a 2.4" color LCD and a Positional sensing addon built-in

The latest MegaDrumManagerFX version is now 20200331. This version is required to support new settings.

In this version:
1. Added support for per input rolls smoothing. Disabled by default and can be set to 1 (lightest smoothing), 2 or 3 (strongest smoothing). When set to 1, 2 or 3 the MIDI Note On levels will be smoothed if hits from the same input come within Note Off Delay. Ignored on Atmega.

I normally ship modules within 7 days and kits within 5 days after an order is placed (often quicker).
I'm away from December 26th till January 9th. As a result it may take longer for me to build and send modules/kits after receiving payments.

Just as before, to compensation for longer wait times during this period I offer free shipping for all orders if:
you order between now and January 10th and If you're prepared to wait up to 21 days between placing an order and the order being shipped.

The latest MegaDrumManagerFX version is now 20181028. This version is required to support Noise Filtering introduced in the firmware version 20181028.

In this version:
1. A new setting called Noise Filter Level was added in Misc settings. This is to support the new setting in the latest MegaDrum firmware version. Default is set to 5. Level 0 corresponds to old default noise filtering. This setting is only effective on STM32F205 based MegaDrum.

I normally ship modules within 7 days and kits within 5 days after an order is placed (often quicker).
I'm away from 29th July till 5th August and I'm going to be busy with extra work till mid August . As a result I will have much less time to build modules/kits during this period.

As a way of compensation for longer wait times I offer the following:
IF you order between now and about 10th August and If you're prepared to wait up to 20 days between placing an order and the order being shipped I will do shipping for free.

A while back I ordered a batch of 1.8" color LCDs but nowadays I mostly get orders for modules/kits with 2.4" color LCDs. As a result a I have a number of 1.8" LCDs lying as dead weight. So to put them to good use I will offer kits/modules with 1.8" LCDs with a 10GBP discount (so they'll cost even less then kits/modules with standard LCDs).

This offer will run until I have 2-3 1.8" LCDs left.

The latest MegaDrumManagerFX version is now 20180222. In this version:
1. MIDI Log Bar colors handling improvement by jarosz for head/bow, rim/edge, bell hits.
2. All spinner boxes now allow to enter new value without cursor jumping in the spinner box while 'Live Updates' are enabled.

The latest MegaDrumManagerFX version is now 20171229. This version now properly handles 'TriggeredIn' MIDI messages when 'Send TriggeredIn' is enabled and it now switches to a last triggered input view.

The latest MegaDrumManagerFX version is now 20171228. This version fixes LoadAll/SaveAll behavior if the operation is canceled (doesn't reset settings in MDMFX to last loaded/saved config).